why-us
 


Why buy from Us...   What makes our Hydrogen systems better then the rest?


Good question!  We get asked that alot from people searching the internet trying to find the best hydrogen generator for their vehicle, so we came up with a few reasons that we feel separate us from the competition.

We are not posting these differences to brag about our company or try and put down the efforts of our competitors. We are glad that people are trying to make our world a greener better place and stop our dependency on foreign oil. Unfortunately there are a lot of backyard engineers trying to separate you from your hard earned money and we just want to show you the difference between companies so that you have all of the facts to make a good decision on what system is best for you.
 
Reason # 1;  Lowest Price

It would do us no good to have the best hydrogen on demand system in the world if it were so overpriced that no one could afford to buy it, true?  Our most popular standard system sells for under $300.00 for a complete kit. The kit comes with every thing you need for a full installation, including our 24 page full color step by step installation manual.

Other companies will try to tell you that you can not get a quality system for the price that we sell our units for, don't believe them. We will put our system up against any system on the market. The average price of our competitors comparable unit costs around $525.00 and you don’t get the benefits that our units offer.
Reason # 2,  Quality of our Products!

why-us2a
We are the only company selling Hydrogen systems that I've seen that have the hose barb fittings that are attached in the water reservoirs, Blow Molded into the tanks so that they become part of the tank and will never leak. Other hydrogen companies drill the holes into the water tanks and try to glue the fittings back into the tanks. Might not sound like a big deal to you now, but it will in about 60 days when the fittings are leaking like a garden hose all over your engine. No matter what glue or epoxy you use, it will never hold up to the constant soaking from the electrolyte mixture in the water tanks. Quality control and customer satisfaction are our highest priority!
 
why-us2b
We build our Hydrogen Generators from the Highest-Grade 316L Stainless Steel Available! The stainless steel plates that are used to produce the hydrogen gas in any unit are the most important aspect of a hydrogen generator. If you don't start with the best 316 L Stainless Steel, your unit will begin to rust and fall apart within a couple of months. To Save Money, some companies will use a lower grade 304 steel. Don't Be Fooled! Look at our photograph of how 316 L and 304 grade Steel Compare after our road tests. We make sure that our Hydrogen System produces the cleanest HHO gas by spending hours prepping each individual cell plate by cross sanding  with a 36 grit paper to achieve the maximum surface area. Our Cell Plate Systems are assembled in a dust free environment wearing rubber gloves, and every plate is then carefully cleaned with alcohol to insure the best performance out of every unit. Our Units will not produce foam, slime or rust water!
Reason # 3; Safe Electrolyte Mixture!

why-us3
All hydrogen companies need to use some type of an electrolyte mixture that you mix with distilled water, to act as a catalyst to produce the hydrogen gas. Most companies , if not all, including us, use Lye products called Potassium Hydroxide or Sodium Hydroxide. When the amount of this electrolyte, potassium hydroxide is mixed into a high ratio concentration, the mixture becomes very dangerous and harmful to all aluminum parts. If this mixture were to ever get sucked into your engine it would begin to eat away at and destroy your engine from the inside out. This is some nasty stuff when mixed to strong.

We have engineered our hydrogen systems to run at a very low and safe ratio, only 2 teaspoons of potassium hydroxide electrolyte mixed with a full gallon of distilled water. This is not harmful or dangerous to your engine in any way.

Most all other hydrogen companies use very high amounts of an electrolyte mixture, almost an entire cup of Potassium Hydroxide electrolyte mixed with only a half gallon of distilled water. Very Dangerous! When you are shopping around for your hydrogen generator system ask the company if their hydrogen unit takes more than 2 teaspoons of electrolyte per gallon of water, if it does, stay away! It is not worth it no matter what the gas savings are. 

Reason # 4;  We don’t need a P.W.M. or an E.F.I.E.

why-us4
Our systems do not need or require the use of a P.W.M. or an E.F.I.E.
Our Units do not over heat and will self regulate the amperage, even after running for 24 hours straight.

Other hydrogen companies systems require that you add a P.W.M. and an E.F.I.E. unit for you to be able to control the run away heat and amperage of their systems. See for yourself; Just go to their websites and they will have big ads trying to sell you these items. Their units require these items because they are not using the newest technology and they are selling you old school designs. There is nothing wrong with these older technology units, but if you are going to buy a hydrogen system for your vehicle why not get the most effective, advanced technology available. Especially since the price of our new designs cost less than their older ones.


Reason # 5; We’re a real company!

We have 2 locations; our factory where we build our patent pending hydrogen systems, and a separate beautiful retail facility where the public is welcome to stop by and check out our latest technology. Come on by!

The majority of hydrogen companies build their hydrogen systems part time out of a home garage or basement. Not sure that's true? Call a hydrogen company and ask them if you can stop by their location today to buy a system and have it installed at their install facility or just to check out their newest designs. They will most likely tell you no, and try to get you to purchase from their website because they don’t have a real physical location.

If you do a search on the address that they have posted on their websites you will see that they are probably post office boxes, not a real location. Most of them don’t even have phone tech support, you have a choice of email only response, or leave a message and they will get back to you. (usually when they get home from their other job) Not Good! When you are dealing with a hydrogen generator you need to work with a real company with a live tech support team. You will regret it if you don’t!


shop-pics